产品目录
联系我们

联系方式
联系人:黄小姐
手机:15011660827
QQ:1240482636
Email:1240482636@qq.com

公司电话:0769-22474511

公司传真:0769-22325536
公司地址:东莞市万江区阳光海岸一期7栋225

邮编:523000
公司网址:http://www.huake17.com.cn
               http://www.btu17.com

产品详情
  • 产品名称:CEDAR数显扭力起子DSD-4M

  • 产品型号:DSD-4M
  • 产品厂商:其它品牌
  • 产品价格:0
  • 折扣价格:0
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
CEDAR数显扭力起子DSD-4M (1) Automatic screw turning with Ratchet mechanism without changing the grip.
详情介绍:

CEDAR数显扭力起子DSD-4M

   产品特点

Compact lightweight one apparatus...
The Final edition of management of bolting torque.

 

Screw tightening control
DSD-4

 

● DIGITAL TORQUE DRIVER  DSD-4M

 

 

CEDAR数显扭力起子DSD-4M

(1) Automatic screw turning with Ratchet mechanism without changing the grip.

(2)Preinstall "Real-time Output Mode" Which Outputs Load Torque Every [ about 1 / 70] Seconds. A graph can be written with a personal computer.

(3)Display, Preservation, and Output about Maximum, Minimum, and Average of Measured Value.

*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
*Available in: lb-in, kg-cm and N-m (specify units when ordering)
*Peak, Real Time and Peak Down measuring mode (selectable)
*300 data memory for recall or for SPC download
*Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
*Programmable screw tightening counter
*Programmable Auto Zero function resets unit to zero for easy operation
*Both CW and CCW operation
*RS-232 output for SPC capability
*Runs on internal NiCad batteries (for 8 hours) Auto shut-off after 10 min. of non-use
*Step less one-way clutch adapter (1/4" female hex), AC charger and carrying case included.

 

 

 

性能参数

尺寸图

相关附件

 

 

Specification

DSD-4M

Measuring range
(at the time of Track)

0.030 - 4 N-m

0.3040 kgf-cm

0.3035 lbf-in

*A measurement unit is fixed to one unit. Specify units when ordering

Accuracy

± 0.5% (in case of reading 499 or less = last digit +/- 3 reading)

Measuring unit

lbfin-kgfcm-Nm

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Measuring
mode

P-P  Peak

Holding Peak Load Value

T-R  Track

Showing Real time torque value ( Used for Zero-Adjustment )

P-D  Peak down

Holding Load Value at the moment to change from upward to downword

C Real-time output

Load torque value is outputted every about1/ 70 second by RS232C.

Decision
function

Setting of torque value

Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing

The Maximum, the minimum, and the average value

Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.

Data spec.

Data transfer

Serial interface RS232C (Baud rate : 9600)

Data memory

300 data / ten channels data

A setup of the number of counts

One to 99 count   (count in a direction with a bundle)

Power supply

Ni-Cd chargeable battery 1.2V×4cells 600mAh

Auto power save

10 minutes no use, automatically switch off.

Charging time

From empty - less than 5hours

Continues working time

12 hours

Bit fit mouth

HEX6.35

Weight

330g

Attachment

Bit (+) #1 #2 

Accessories
 (one piece each)

Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC- DC 7.5V 120mA Output

An inspection report, a proofreading certificate, a traceability system figure

姓名:
电话:
您的需求: