产品目录
联系我们

【联系方式】
袁小姐 13809268642

黄小姐 15011660827

张小姐 18676916493


公司电话：0769-22474511

公司传真：0769-22325536
公司地址：东莞市万江街道莞穗路万江段77号101鱼涌湾综合大楼三楼（靠近光辉家具）

公司网址：http://www.btu17.com

产品详情
查看大图

  • 产品名称：CEDAR数显扭力扳手

  • 产品型号：DI-5M-RL02
  • 产品厂商：其它品牌
  • 产品价格：0
  • 折扣价格：0
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
CEDAR数显扭力扳手It is compactly about a detection part.To management of bolting of a screw bolt.Bolting measurement of screw and bolt TORQUE CHECKER DI-5M seriesSeparate type merit!
详情介绍：
CEDAR数显扭力扳手
DI-5M-RL02
To measurement of the minute torque of 200 or less mN-m

Since the detection part was small and a light weight, minute
 torque measurement which needs prudence for handling was enabled.

DI-5M-RL2
Measurement to 2N・m

It is easy to use measuring range widely

DI-5M-RL6
Measurement to 6 N・m

DI-5M-TW15
Torque measurement of a narrow place was also attained.

The maximum capacity   15 N-m
The minimum scale   0.01 N-m

(in addition -- Peak-Peak mode -- 0.15 N-m)

DI-5M-TW20
To the measurement of high torque to 20 N-m

NEW FUNCTIONS
(1) Preinstall "Real-time Output Mode" Which Outputs Load Torque Every
[ about 1 / 80] Seconds. A graph can be written with a personal computer.

(2)Display, Preservation, and Output about Maximum, Minimum, and Ave
rage of Measured Value
The main functions (DI-5M series) 
- A maximum and minimum set torque O.K.!
 Setting value is told with a buzzer and an LED lamp.
- A data memory is 300.
Data can carry out personal computer management with a RS232C output.
- It is a rechargeable battery drive and is convenience!
Furthermore, it is safe operation at auto-power-off.
- Tighting Counter!
The number of screw bundle is counted. Forgetting can be prevented.
性能参数
尺寸图
相关附件
 
Specification
DI-5M-RL02
DI-5M-RL2
DI-5M-RL6
DI-5M-TW15
DI-5M-TW20
Measuring range
1.5～200mN･m
0.015～2kgf・cm
0.015～1.8lbf・in
0.015～2N･m
0.15～20 kgf・cm
0.15～18lbf・in
0.15～6N･m
1.5～60kgf・cm
1.5～54lbf・in
0.15～15 N･m
1.5～150 kgf・cm
1.5～130 lbf・in
0.15～20N･m
1.5～200kgf・cm
1.5～180lbf・in
Accuracy
±0.5% (or less 199±1digit)
Display
The 3.5 figures digital display of LCD
The measurement direction
CW-CCW (right and left)
Measuring
mode
P-P  Peak
Peak load value hold.
T-R  Track
Indication of real time torque value.
P-D  Peak down
Holding Load Value at the moment to change from upward to downword
C Real-time output
Load torque value is outputted every about1/ 80 second by RS232C.
Decision
function
Setting of torque value
A top and a minimum value are in a measuring range, and a setup is possible.
Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value
Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance
It is a display clearance in set-up time.   (0.5 - 3.0 sec)
One-touch zero
A clear button is pushed and it is a zero. data output.
A setup of the number of counts
One to 99 count   (count in a direction with a bundle)
Data spec.
Data transfer
Serial interface RS232C (Baud rate : 9600)
Data memory
300 data stored
Power supply
Ni-Cd chargeable battery 1.2V×4cells 450mAh
Auto power save
10 minutes no use, automatically switch off.
Charging time
From empty - less than 4hours
Continues working time
10 hours
Meter outside type dimension
64(W) x104(D) x25 (H) (It does not contain by the projection thing.)
Weight
Meter part    208g
Bit/Socket part
Φ4
HEX 6.35
□　6.35
□　9.5
Accessories
 (one piece each)
Φ4 bits
(＋)　♯0/♯1
6.35HEX bits
(＋)　♯1/♯2
One-way socket
Receipt case
AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
An inspection report, a proofreading certificate, a traceability system figure
* TW15 models of roller clutches are used.
The one-way mechanism with sufficient efficiency with a return angle of 0 degree is attached. 　(at the time of a right-hand-thread bundle)


 
姓名：
电话：
您的需求：